Low-temperature Plasma Assisted Thermochemical Treatments of AISI 420 Steel: Comparative Study of Obtained Layers

Materials Research

Cristiano José Scheuer¹  Rodrigo Perito Cardoso¹  Silvio Francisco Brunatto¹ 

关键词: low temperature plasma thermochemical treatments;    carburizing;    nitrocarburizing;    nitriding;    AISI 420 martensitic stainless steel;   

DOI  :  10.1590/1516-1439.013815

来源: SciELO

【 摘 要 】

Formation of metastable C–, N–, or even Formation of metastable C–, N–, or even C/N– expanded phases can be observed for typical non-equilibrium conditions attained at the plasma assisted thermochemical treatments when temperatures relatively low are used. In present work, kinetics data are considered in a comparative study comprising low-temperature plasma assisted carburizing, nitriding and nitrocarburizing of AISI 420 martensitic stainless steel samples treated at 350, 400, and 450 °C, aiming to put in evidence the main metallurgical differences of the obtained layers. Microstructural characterization and hardness measurement results for untreated and treated sample surfaces show significant difference for the carburized layer growth in relation to that verified for the nitrided and nitrocarburized layers. While the carburized layer is constituted of a thin outer layer and a deep diffusion layer, just the opposite was observed for the other two treatments, id est., formation of thicker outer layers and thinner diffusion layers. Finally, carbide-/nitride-precipitation-free layers were supposedly obtained for samples carburized, nitrided, and nitrocarburized at 350 °C temperature.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License