Influence of intercalation methods in properties of Clay and carbon nanotube and high density polyethylene nanocomposites

Materials Research

Bruna Louise Silva²  Fernanda Czerkies Nack²  Carlos Mauricio Lepienski¹  Luiz Antonio Ferreira Coelho²  Daniela Becker² 

[1] ,Universidade do Estado de Santa Catarina Centro de Ciências Tecnológicas Joinville SC ,Brasil

关键词: nanocomposites;    polyethylene;    carbon nanotube;    Clay;    mixing methods;   

DOI  :  10.1590/1516-1439.303714

来源: SciELO

【 摘 要 】

In this work, nanocomposites with simultaneous dispersion of carbon nanotubes and clays in a high density polyethylene (HDPE) matrix were prepared. Two different processes of preparation were employed: solution or melt intercalation. Two different montmorillonite clays were used separately: a natural (MMT-Na) or an organoclay (MMT-30B) and it was used multiwalled carbon nanotubes (MWCNT). Thermal properties were evaluated by DSC and TGA, mechanical properties were evaluated by nanoindentetion and morphology was investigated by transmission electronic microscopy (TEM). Alterations of 20% in crystallinity were detected, increases in Young´s modulus up to 12% were observed and up to 20% of increase was observed in Oliver-Pharr hardness. It is possible to explain part of those results based on the state of dispersion observed in our TEM results.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License