Recrystallization of a Ti-45Ni-5Cu cold-worked shape memory alloy characterized by thermoelectric power and electrical properties

Materials Research

Daniel Enrique Soto-parra²  Horacio Flores-zúñiga²  Enrique López Cuéllar²  Raul Armando Ochoa-gamboa¹  David Ríos-jara² 

[1] ,Instituto Potosino de Investigación Científica y Tecnológica División de Materiales Avanzados San Luis Potosí S.L.P ,México

关键词: effect of cold work;    recrystallization;    shape memory alloy;    thermoelectric power;   

DOI  :  10.1590/1516-1439.265814

来源: SciELO

【 摘 要 】

The recrystallization of a cold-worked shape memory alloy (SMA) without R-phase transition, i.e. the Ti-45.0Ni-5.0Cu (% at.), has been studied by thermoelectric power (TEP) technique and electrical resistivity change (Dρ) on several heat treated samples after cold working. This study was also supported by differential scanning calorimetry (DSC), transmission electron microscopy (TEM) and hardness Vickers (HV) measurements. Transformation temperatures show an increase with heat treatment temperature, while hysteresis decreases. Hardness values decrease with aging temperature for the same heat treatment time. No important changes were observed in electrical resistivity with heat treatment temperature, except at 300ºC. TEP results show an important increase with heat treatment temperature, and a linear relationship was found between hardness and thermoelectric power. With this correlation between TEP and microhardness it is possible to predict its mechanical response by knowing its TEP, so this correlation could be important for applications.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License