Corrosion resistance and glass forming ability of Fe47Co7Cr15M9Si5B15Y2 (M=Mo, Nb) amorphous alloys

Materials Research

Carlos Alberto Caldas De Souza²  Claudomiro Bolfarini¹  Walter José Botta Jr.¹  Luiz Rogério Pinho De Andrade Lima²  Marcelo Falcão De Oliveira¹  Claudio S. Kiminami¹ 

[1] ,Federal University of Bahia Department of Materials Science and Technology Salvador BA ,Brazil

关键词: amorphous alloys;    corrosion;    glass forming ability;   

DOI  :  10.1590/S1516-14392013005000116

来源: SciELO

【 摘 要 】

In the present work the effect of substituting Mo with Nb on the glass forming ability and corrosion resistance of Fe-Co-Cr-M-Si-B-Y (M=Mo, Nb) ribbons with high corrosion resistance is investigated. The X-ray powder diffraction pattern indicates that the alloy containing both Nb and Mo presented greater glass forming ability than the alloy containing either of these elements separately. The results obtained indicate that Mo is more effective in enhancing corrosion resistance than the Nb in 4.0 M HCl solution. The alloy containing both Nb and Mo presented greater overall corrosion resistance than the alloy containing only one of these elements.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License