Thermoplastic polyurethane synthesis using POSS as a chain modifier

Materials Research

Gabriel Hoyer Lopes²  Janaína Junges²  Rudinei Fiorio¹  Mara Zeni²  Ademir José Zattera² 

[1] ,Caxias do Sul UniversityCaxias do Sul RS ,Brazil

关键词: thermoplastic polyurethane;    POSS;    FTIR;    thermal stability;    DSC;    capillary rheometry;   

DOI  :  10.1590/S1516-14392012005000085

来源: SciELO

【 摘 要 】

In this study, thermoplastic polyurethanes (TPUs) were synthesized using the one-shot process in solution. To obtain the samples n-phenylaminopropyl polyhedric oligomeric silsesquioxane (POSS) was added as a chain modifier during the synthesis in four different amounts. The samples were characterized by infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and capillary rheometry. FTIR confirm the TPU attainment due the absence of the band at ~2253 cm-1 suggesting a complete conversion of the isocyanate terminations. The TGA showed that incorporation of POSS decreased the rate of mass loss of TPU under isothermal conditions. The flexible phase showed an enhanced stability to temperature, probably due to increased phase separation between the rigid and flexible domains. The DSC showed that incorporation of 0.4 wt. (%) of POSS increased the glass transition temperature of the flexible phase. Moreover, addition of POSS modified the melting behaviour, providing samples with a higher melting enthalpy compared to neat TPU as a consequence of the formation of larger crystals. The capillary rheometry analysis revels that the POSS addition showed a clear tendency toward higher intrinsic viscosities as the amount of POSS was increased.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License