Synthesis and characterization of La1-xSr xMnO3±δ powders obtained by the polymeric precursor route

Materials Research

Adriano Alves Rabelo²  Marfran Cardoso De Macedo¹  Dulce Maria De Araújo Melo¹  Carlos Alberto Paskocimas¹  Antonio Eduardo Martinelli¹  Rubens Maribondo Do Nascimento¹ 

[1] ,Federal University of Pará Faculty of Materials Engineering Marabá PA ,Brazil

关键词: perovskite;    polymeric precursor;    SOFC;   

DOI  :  10.1590/S1516-14392011005000018

来源: SciELO

【 摘 要 】

Polycrystalline strontium-doped lanthanum manganite (LSM) powders with 0.15, 0.22, and 0.30 mol % Sr were synthesized by the polymeric precursor route using a molar ratio of 3:1 citric acid and metal cations. The powders were characterized by Fourier transform infrared spectroscopy, thermal analysis, high-temperature X-ray diffraction to determine the crystalline perovskite phase and crystallite sizes, scanning electron microscopy for the morphological analysis, nitrogen adsorption to determine the specific surface area, and laser scattering to evaluate the particle size distribution. The LSM perovskite-type oxides containing intermediate 0.22 mol % Sr were found to exhibit a tendency to decrease in crystallite size and increase in specific surface area and, when calcined at 700-900 ºC exhibited a pure phase of perovskite, had a crystallite size of about 17-20 nm and a specific surface area for 900 ºC of 34.3 m².g-1.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License