Effect of carbon nanotubes addition on the mechanical and thermal properties of epoxy matrices

Materials Research

Marcio Rodrigo Loos²  Luiz Antonio Ferreira Coelho²  Sérgio Henrique Pezzin²  Sandro Campos Amico¹ 

[1] ,UDESC Centro de Ciências Tecnológicas Joinville SC ,Brazil

关键词: carbon nanotubes;    epoxy matrix;    nanocomposites;    mechanical properties;   

DOI  :  10.1590/S1516-14392008000300019

来源: SciELO

【 摘 要 】

In this work, nanocomposites were prepared by adding a small amount of single walled carbon nanotubes (SWCNTs) to an epoxy resin aiming to study the resulting mechanical, viscoelastic and thermal properties of the nanocomposites. To optimize the processing of the nanocomposites and to favor a homogeneous dispersion of the SWCNTs on the matrix, acetone was used to reduce resin viscosity, increasing diffusion of the SWCNTs in the solution. The epoxy/SWCNTs/acetone systems were also sonicated in order to minimize entanglement of the SWCNTs. The systems were characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, thermogravimetry, differential scanning calorimetry and dynamic mechanical analysis. The results indicated that the addition of small amounts of SWCNTs to epoxy leads to slight structural changes in the epoxy matrix which, together with the presence of SWCNTs, may reflect on its mechanical and viscoelastic properties

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License