Process parameter optimization for fly ash brick by Taguchi method

Materials Research

Prabir Kumar Chaulia¹  Reeta Das¹ 

[1] ,Central Mechanical Engineering Research InstituteDurgapur,India

关键词: optimization;    compressive strength;    fly ash brick;    Taguchi method;   

DOI  :  10.1590/S1516-14392008000200008

来源: SciELO

【 摘 要 】

This paper presents the results of an experimental investigation carried out to optimize the mix proportions of the fly ash brick by Taguchi method of parameter design. The experiments have been designed using an L9 orthogonal array with four factors and three levels each. Small quantity of cement has been mixed as binding materials. Both cement and the fly ash used are indicated as binding material and water binder ratio has been considered as one of the control factors. So the effects of water/binder ratio, fly ash, coarse sand, and stone dust on the performance characteristic are analyzed using signal-to-noise ratios and mean response data. According to the results, water/binder ratio and stone dust play the significant role on the compressive strength of the brick. Furthermore, the estimated optimum values of the process parameters are corresponding to water/binder ratio of 0.4, fly ash of 39%, coarse sand of 24%, and stone dust of 30%. The mean value of optimal strength is predicted as 166.22 kg.cm-2 with a tolerance of ± 10.97 kg.cm-2. Confirmatory experimental result obtained for the optimum conditions is 160.17 kg.cm-2.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License