Performance of 3Y-TZP bioceramics under cyclic fatigue loading

Materials Research

Renato Chaves Souza²  Claudinei Dos Santos²  Miguel Justino Ribeiro Barboza²  Carlos Antonio Reis Pereira Baptista²  Kurt Strecker¹  Carlos Nelson Elias¹ 

[1] ,Universidade de São Paulo Escola de Engenharia de Lorena Lorena SP ,Brazil

关键词: dental materials;    3Y-TZP;    mechanical properties;    fatigue;   

DOI  :  10.1590/S1516-14392008000100017

来源: SciELO

【 摘 要 】

In this work, the static mechanical properties and cyclic fatigue life of 3 mol. (%) Y2O3-stabilized tetragonal zirconia polycrystalline (3Y-TZP) ceramics were investigated. Pre-sintered samples were sintered in air at 1600 °C for 120 minutes, and characterized by X ray diffraction and scanning electronic microscopy. Hardness and fracture toughness were determined by Vicker's indentation method, and Modulus of Rupture was determined by four-point bending testing. Fully dense sintered samples, near to 100% of theoretical density, presented hardness, fracture toughness and bending strength of 13.5 GPa, 8.2 MPa.m½ and 880 MPa, respectively. The cyclic fatigue tests were also realized using four-point bending testing, within a frequency of 25 Hz and stress ratio R of 0.1. The increasing of load stress lead to decreasing of the number of cycles and the run-out specimens number. The tetragonal-monoclinic (t-m) ZrO2-transformation observed by X ray diffraction contributes to the increasing of the fatigue life. The 3Y-TZP samples clearly presents a range of loading conditions where cyclic fatigue can be detected.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License