An investigation of hot deformation response of particulate-reinforced magnesium + 4.5% titanium composite

Materials Research

B. K. Raghunath²  R. Karthikeyan²  M. Gupta¹ 

[1] ,Annamalai University Department of Manufacturing Engineering Annamalai Nagar,India

关键词: magnesium composite;    disintegrated melt deposition;    processing maps;    hot workability;   

DOI  :  10.1590/S1516-14392006000200019

来源: SciELO

【 摘 要 】

The deformation response of magnesium based metal matrix composite was investigated by means of hot compression tests. The flow curves were obtained in the temperature and strain rate range of 300-500 °C and 0.001-1 s-1 respectively in order to obtain the processing maps of the studied material and interpreting them on the basis of the dynamic material model. Micro-structural characterization studies conducted on the deformed composite samples, using optical and scanning electron microscopy, revealed a recrystallized grain morphology, debonding of Titanium particles, particle breakage and cracking of the matrix. The observations were performed in order to describe the behavior of the material under hot forming operation in terms of material damage and micro- structural modification.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License