Processing of bulk Bi-2223 high-temperature superconductor

Materials Research

Alexander Polasek²  Luiz Antonio Saléh²  Hortêncio Alves Borges¹  Eduardo Novaes Hering¹  Bojan Marinkovic¹  Fernando C. Rizzo Assunção¹  Eduardo Torres Serra¹  Glória Suzana De Oliveira¹ 

[1] ,Electric Power Research Center CEPEL Special Technologies DptRio de Janeiro RJ ,Brazil

关键词: high temperature superconductor;    Bi-2223;    partial melting;    bulk;   

DOI  :  10.1590/S1516-14392005000400006

来源: SciELO

【 摘 要 】

The Bi2Sr2Ca2Cu3 O10+x (Bi-2223) is one of the main high temperature superconductors for applications. One of these applications is the Superconductor Fault Current Limiter (SCFCL), which is a very promising high temperature superconducting device. SCFCL's can be improved by using bulk superconductors with high critical currents, which requires a sufficiently dense and textured material. In the present work, a process for improving the microstructure of Bi-2223 bulk samples is investigated. Pressed precursor blocks are processed by sintering with a further partial melting step, in order to enhance the Bi-2223 grain texture and to healing cracks induced by pressing. In order to improve the microstructure, the precursor is mixed with silver powder before pressing. Samples with and without silver powder have been studied, with the aim of investigating the influence of silver on the microstructure evolution. The phase contents and the microstructure obtained have been analyzed through XRD and SEM/EDS. The electromagnetic characterization has been performed by Magnetic Susceptibility Analysis. We present and discuss the process and the properties of the superconducting blocks. High fractions of textured Bi-2223 grains have been obtained.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License