Erosion-oxidation behavior of thermal sprayed Ni20Cr alloy and WC and Cr3C2 cermet coatings

Materials Research

Clarice Terui Kunioshi¹  Olandir Vercino Correa¹  Lalgudi Venkataraman Ramanathan¹ 

[1] ,Instituto de Pesquisas Energéticas e Nucleares Corrosion Laboratory São Paulo SP ,Brazil

关键词: erosion;    oxidation;    high temperature;    composite coatings;    HVOF;   

DOI  :  10.1590/S1516-14392005000200005

来源: SciELO

【 摘 要 】

An apparatus to conduct high temperature erosion-oxidation studies up to 850 °C and with particle impact velocities up to 15 m.s-1 was designed and constructed in the Corrosion Laboratories of IPEN. The erosion-oxidation behavior of high velocity oxy fuel (HVOF) sprayed alloy and cermet coatings of Ni20Cr, WC 20Cr7Ni and Cr3C2 Ni20Cr on a steel substrate has been studied. Details of this apparatus and the erosion-oxidation behavior of these coatings are presented and discussed. The erosion-oxidation behavior of HVOF coated Cr3C2 25(Ni20Cr) was better than that of WC 20Cr7Ni, and the erosion-oxidation regimes have been identified for these coatings at particle impact velocity of 3.5 m.s-1, impact angle of 90° and temperatures in the range 500 to 850 °C.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License