Addition of sedimentary rock to kaolinitic clays: influence on sintering process

Cerâmica

A. E. Souza¹  S. R. Teixeira¹  G. T. A. Santos¹  E. Longo¹ 

[1] ,Universidade Estadual Paulista Departamento de Física, Química e Biologia Presidente Prudente SP ,Brasil

关键词: clay;    sedimentary rock;    fluxes;    sintering;    mullite;    argila;    rocha sedimentar;    fundentes;    sinterização;    mulita;   

DOI  :  10.1590/S0366-69132013000100017

来源: SciELO

【 摘 要 】

The physical and mechanical properties of clay-based ceramic probes with sedimentary rock added as the non-plastic component were evaluated. Samples were prepared with 0, 20, 40, 60 and 80 wt.% of rock added to the clay material. Pressed (7 ton) probes were sintered at 500, 800, 900, 1000, 1100 and 1200 °C and submitted to X-ray diffraction analysis and technological characterization. The X-ray diffraction results showed that the sedimentary rock had micaceous clay minerals, while the clay material had kaolinite as the main phases. Thermal analysis and X-ray diffraction showed reactions that indicated transformation (inversion of quartz), decomposition (loss of hydroxides) and phase formation (mullite) during heat treatment of the samples. The technological tests showed that the addition of sedimentary rock improved some properties of the sintered material, aided by the presence of fluxes. However, the presence of quartz in the rock hampered the formation of the mullite phase. The formation of new phases and transformations occurring during the heating and cooling of the samples helped explain the technological properties of ceramic materials.

【 授权许可】

CC BY-NC   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License