Review Article: recent advances in metal-ceramic brazing

Cerâmica

R. M. Do Nascimento²  A. E. Martinelli²  A. J. A. Buschinelli¹ 

[1] ,Universidade Federal do Rio Grande do Norte Departamento de Engenharia Mecânica Natal RN ,59072-970

关键词: ceramic-metal joining;    structural ceramics;    brazing;    metallization;    titanium coating;    junção cerâmica-metal;    cerâmicas estruturais;    brasagem;    metalização;    revestimento de titânio;   

DOI  :  10.1590/S0366-69132003000400002

来源: SciELO

【 摘 要 】

Metal-ceramic joining has slowly but steadily become an important manufacturing step. The evolution of joining processes has allowed ceramics to be used in combination with metals in a number of hybrid devices from traditional light bulbs and seals to improved cutting tools and modern monitoring and measuring electronic devices. New joining methods and newer approaches to conventional methods have been developed aiming at joints characterized by improved reliability, and interfaces capable of withstanding high-temperature resistance with minimum residual stresses. A summary of recent improvements on alternative approaches to ceramic-metal joining as well as new developments on brazing are presented herein. The present review also focuses on recent advances towards brazing metallized ceramics and the selection of filler alloys, since in a scenario that includes joining by laser and direct bonding with liquid transient phases, brazing continues to be by far the most widely used approach to joining as a result of its low-cost and possibility to join intricate geometries for large-scale production. Finally, methods to evaluate the mechanical strength and residual thermal stresses are presented in addition to alternative approaches to minimize residual stresses and, consequently, improve joint reliability.

【 授权许可】

CC BY-NC   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License