THERMOPHYSICAL PROPERTIES OF 1-BUTYL-3-METHYLIMIDAZOLIUM BIS(TRIFLUOROMETHYLSULFONYL)IMIDE AT HIGH TEMPERATURES AND PRESSURES

Brazilian Journal of Chemical Engineering

R. Hamidova¹  I. Kul¹  J. Safarov¹  A. Shahverdiyev¹  E. Hassel¹ 

关键词: Vibration tube densimeter;    Equation of state;    Isothermal compressibility;    Isobaric thermal expansibility;   

DOI  :  10.1590/0104-6632.20150321s00003120

来源: SciELO

【 摘 要 】

Abstract Pressure-density-temperature (p, ρ ,T) data of the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTF2] at T = (273.15 to 413.15) K and pressures up to p =140 MPa are reported with an estimated experimental relative combined standard uncertainty of Δ ρ / ρ = ±(0.01 to 0.08)% in density. The measurements were carried out with a newly constructed Anton-Paar DMA HPM vibration-tube densimeter. The system was calibrated using double-distilled water, aqueous NaCl solution, methanol, toluene and acetone. An empirical equation of state for fitting the (p, ρ ,T) data of [BMIM][NTF2] has been developed as a function of pressure and temperature. This equation is used for the calculation of the thermophysical properties of the ionic liquid, such as isothermal compressibility, isobaric thermal expansibility, thermal pressure coefficient, internal pressure, isobaric and isochoric heat capacities, speed of sound and isentropic expansibility.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License