Up-gradation of MoO3 and separation of copper, iron, zinc from roasted molybdenum ore by a leaching process

Brazilian Journal of Chemical Engineering

Jin-young Lee¹  Jyothi Rajesh Kumar¹  Ho-seok Jeon¹  Joon-soo Kim¹ 

[1],Korea Institute of Geoscience and Mineral Resources Extractive Metallurgy Department ,Republic of Korea

关键词: Molybdenum;    Up-gradation;    Leaching process;    Separation;   

DOI  :  10.1590/S0104-66322013000200016

来源: SciELO

【 摘 要 】

The present research paper deals with the oxidation process of molybdenum ore. The main target of the present study is the up-gradation of MoO3 from roasted molybdenum ore by a leaching process without waste generation. The most important application of hydrometallurgical processing is the leaching process of the ore and it is the primary process to make pure metal from ore. The present investigations optimize the following experimental parameters to improve the concentration of MoO3 as well as the separation of copper, iron and zinc in roasted molybdenum ore: effect of acid concentration, temperature, pulp density and leaching time were studied systematically. The temperature study was carried out at 550-595 ºC for the oxidation process. The XRD result shows that oxidation process of molybdenum ore and SEM pictures were taken for particles before and after the oxidation process at 585 ºC for 360 min.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License