Effectiveness-ntu computation with a mathematical model for cross-flow heat exchangers

Brazilian Journal of Chemical Engineering

H. A. Navarro²  L. C. Cabezas-gómez¹ 

[1] ,UNESP IGCE Matemática Aplicada e ComputaçãoRio Claro SP ,Brazil

关键词: Effectiveness;    NTU;    Heat exchangers;    Mathematical model;   

DOI  :  10.1590/S0104-66322007000400005

来源: SciELO

【 摘 要 】

Due to the wide range of design possibilities, simple manufactured, low maintenance and low cost, cross-flow heat exchangers are extensively used in the petroleum, petrochemical, air conditioning, food storage, and others industries. In this paper a mathematical model for cross-flow heat exchangers with complex flow arrangements for determining epsilon -NTU relations is presented. The model is based on the tube element approach, according to which the heat exchanger outlet temperatures are obtained by discretizing the coil along the tube fluid path. In each cross section of the element, tube-side fluid temperature is assumed to be constant because the heat capacity rate ratio C*=Cmin/Cmax tends toward zero in the element. Thus temperature is controlled by effectiveness of a local element corresponding to an evaporator or a condenser-type element. The model is validated through comparison with theoretical algebraic relations for single-pass cross-flow arrangements with one or more rows. Very small relative errors are obtained showing the accuracy of the present model. epsilon -NTU curves for several complex circuit arrangements are presented. The model developed represents a useful research tool for theoretical and experimental studies on heat exchangers performance.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License