Evaluation of cyclone geometry and its influence on performance parameters by computational fluid dynamics (CFD)

Brazilian Journal of Chemical Engineering

W. P. Martignoni²  S. Bernardo¹  C. L. Quintani¹ 

[1] ,Petróleo Brasileiro S.A.Rio de Janeiro RJ ,Brazil

关键词: CFD;    Cyclones;    Performance;    RSM;    LES;   

DOI  :  10.1590/S0104-66322007000100008

来源: SciELO

【 摘 要 】

Cyclone models have been used without relevant modifications for more than a century. Most of the attention has been focused on finding new methods to improve performance parameters. Recently, some studies were conducted to improve equipment performance by evaluating geometric effects on projects. In this work, the effect of cyclone geometry was studied through the creation of a symmetrical inlet and a volute scroll outlet section in an experimental cyclone and comparison to an ordinary single tangential inlet. The study was performed for gas-solid flow, based on an experimental study available in the literature, where a conventional cyclone model was used. Numerical experiments were performed by using CFX 5.7.1. The axial and tangential velocity components were evaluated using RSM and LES turbulence models. Results showed that these new designs can improve the cyclone performance parameters significantly and very interesting details were found on cyclone fluid dynamics properties using RSM and LES.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License