A nanoparticle-based solid-phase extraction procedure followed by spectrofluorimetry to determine carbaryl in different water samples

Journal of the Brazilian Chemical Society

Ahad Bavili Tabrizi²  Mohammad Reza Rashidi¹  Hadi Ostadi¹ 

[1] ,Tabriz University of Medical Sciences Research Center for Pharmaceutical Nanotechnology Faculty of PharmacyTabriz,Iran

关键词: Fe3O4-MNPs;    SPE;    carbaryl;    environmental water samples;    spectrofluorimetry;   

DOI  :  10.5935/0103-5053.20140024

来源: SciELO

【 摘 要 】

In this study, a new method based on Fe3O4 magnetite nanoparticles (MNPs) has been developed for the extraction, preconcentration and determination of trace amounts of carbaryl from environmental water samples. Fe3O4 MNPs were synthesized and modified by the surfactant sodium dodecyl sulfate (SDS), then successfully applied for the extraction of carbaryl and its determination by spectrofluorimetry. Main factors affecting the adsolubilization of carbaryl such as the amount of SDS, pH value, standing time, desorption solvent and maximal extraction volume were optimized. Under the selected conditions, carbaryl could be quantitatively extracted. Acceptable recoveries (84.5-91.9%) and relative standard deviations (6.2%) were achieved in analyzing spiked water samples. A concentration factor of 20 was achieved by the extraction of 100 mL of environmental water samples. The limit of detection and quantification were found to be 2.1 and 6.9 µg L- 1, respectively. The proposed method was successfully applied for the extraction and determination of carbaryl in environmental water samples.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License