期刊论文详细信息
Journal of the Brazilian Chemical Society
Manufacturing of miniature fluidic modules for lab-on-a-chip using UA photoresin from flexographic platemaking process
Julio Cesar B. Fernandes1  Luiz Otávio S. Ferreira1 
[1] ,Universidade Estadual de Campinas Faculdade de Engenharia Mecânica Departamento de Mecânica ComputacionalCampinas SP ,Brazil
关键词: lab-on-a-chip;    mini-fluidic devices;    modular systems;    urethane-acrylate photoresist;    flexography;   
DOI  :  10.1590/S0103-50532006000400003
来源: SciELO
PDF
【 摘 要 】

A new technique of fabrication of miniaturized fluidic devices was developed using a photoresin based on urethane and acrylate (UA) oligomers used to platemaking for flexographic printers on graphic industry. Fluidic mixers and reactors modules measuring 10×10 mm² were manufactured, with channels width in the 0.25 to 1.00 mm range and 0.75 mm depth. Top covers 4.00 mm thick, with 1.26 mm diameter inlet and outlet holes were used to seal the channels. The sealed channel structures were formed using a film of photoresin as adhesive. Interconnections of 1.20 mm diameter and 10 mm long steel tubes were fixed into inlet and outlet holes. All fluidic modules were manufactured by photolithography of UA, sealed by ultraviolet cure of an UA adhesion layer, package in an UA container and successfully tested for leakage under 2×10(5) Pascal air pressure.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License

【 预 览 】
附件列表
Files Size Format View
RO202005130105221ZK.pdf 419KB PDF download
  文献评价指标  
  下载次数:11次 浏览次数:16次