Electrocatalytic and voltammetric determination of sulfhydryl compounds through iron nitroprusside modified graphite paste electrode

Journal of the Brazilian Chemical Society

Devaney R. Do Carmo¹  Ricardo M. Da Silva¹  Nelson R. Stradiotto¹ 

[1] ,Universidade Estadual Paulista Instituto de Química Araraquara SP ,Brazil

关键词: iron nitroprusside;    graphite paste electrode;    L-cysteine;    N-acetylcysteine;    sulfhydryl compounds;   

DOI  :  10.1590/S0103-50532003000400019

来源: SciELO

【 摘 要 】

Iron nitroprusside Fe(II)NP was incorporated into a carbon paste electrode and the electrochemical studies were performed with cyclic voltammetry. The cyclic voltammogram of Fe(II)NP exhibits two redox couple with formal potential (E0')1 = 0.24 e (E0')2 = 0.85 V vs SCE attributed to Fe(II)/Fe(II) and Fe(II)(CN)5NO / Fe(III)(CN)5NO, respectively. The redox couple with (E0')2 = 0.85 V presents an electrocatalytic response for sulfhydryl compounds. The electrocatalytic oxidation of sulfhydryl compounds by the mediator has been used for the determination of L-cysteine and N-acetylcysteine. The modified graphite paste electrode gives a linear range from 9.2 ×10-4 - 2.0 ×10-2; 9.6 × 10-4 - 1.4 × 10-2mol L-1 for the determination of L-cysteine and N-acetylcysteine, respectively, with detection limit of 1.9 ×10-4 mol L-1; 1.5 × 10-4 mol L-1 and relative standard desviations ± 5% and 1.5 × 10-3 mol L-1 ± 4% (n=3). The amperometric sensitivities are 0.024 and 0.027 muA/mumol L-1 for L-cysteine and N-acetylcysteine, respectively. The application of this electrode was tested and a commercial pharmaceutical product (Fluimucil) has been determined.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License