EVALUACIÓN TÉRMICA DEL CURADO DE ADHESIVOS BASE SBR USANDO PERÓXIDO DE DICUMILO

Química Nova

Beatriz Adriana Salazar-cruz¹  José Luis Rivera-armenta¹  Ricardo García-alamilla¹  Ana María Mendoza-martínez¹  Alejandro Esquivel De La Garza¹  Sergio Moctezuma Espiricueto¹ 

关键词: curing;    kinetic;    crosslink;    adhesive;    swelling;   

DOI  :  10.5935/0100-4042.20150067

来源: SciELO

【 摘 要 】

Curing is an important process in adhesive formulation, but scant reports on the study of the kinetics of curing in adhesive are currently available, particularly for formulations including styrene-butadiene copolymers. The focus of the present work was to thermodynamically quantify the curing reaction in pressure-sensitive adhesives (PSA) obtained from styrene-butadiene copolymers, the effect of dicumyl peroxide (DCP) ratio, which acts as a crosslinking agent, and also evaluate the effect of two reactive adhesive resins, sylvalite and piccolyte. Kinetic parameters were determined by differential scanning calorimetry (DSC) in an isothermic and dynamic mode, gel content was determined as was swelling degree, given these characteristics can be associated with the curing reaction. The kinetic study showed the curing reaction was first order, according to the Ozawa and Kissinger equation. Resins have affinity to BR segment, while in the case of sylvalite and piccolyte to the PS segment, varying behavior with dicumyl peroxide in the adhesive mixture. Lower swelling values were associated with an increase in crosslinking, indicative a curing reaction took place, and the gel content test was used to corroborate the results.

【 授权许可】

CC BY-NC   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License