A New PC and LabVIEW Package Based System for Electrochemical Investigations

Sensors

Zoran Stević¹  Zoran Andjelković² 

[1] University of Belgrade, Technical Faculty in Bor, VJ 12, 19210 Bor, Serbia; E-mails: Z. Andjelković

关键词: Electrochemical Measurements;    Measurement System;    Electrochemical Impedance Spectroscopy;    Cyclic Voltammetry;   

DOI  :  10.3390/s8031819

来源: mdpi

【 摘 要 】

The paper describes a new PC and LabVIEW software package based system for electrochemical research. An overview of well known electrochemical methods, such as potential measurements, galvanostatic and potentiostatic method, cyclic voltammetry and EIS is given. Electrochemical impedance spectroscopy has been adapted for systems containing large capacitances. For signal generation and recording of the response of investigated electrochemical cell, a measurement and control system was developed, based on a PC P4. The rest of the hardware consists of a commercially available AD-DA converter and an external interface for analog signal processing. The interface is a result of authors own research. The software platform for desired measurement methods is LabVIEW 8.2 package, which is regarded as a high standard in the area of modern virtual instruments. The developed system was adjusted, tested and compared with commercially available system and ORCAD simulation.

【 授权许可】

Unknown   
© 2008 by MDPI