Stability Proxies for Water-in-Oil Emulsions and Implications in Aqueous-based Enhanced Oil Recovery

Energies

Vladimir Alvarado¹  Xiuyu Wang² 

[1] Department of Chemical and Petroleum Engineering, University of Wyoming, Dept. 3295, 1000 E. University Ave, Laramie, WY 82071, USA;

关键词: emulsions;    enhanced-oil recovery;    low salinity;    chemical flooding;    mobility control;   

DOI  :  10.3390/en4071058

来源: mdpi

【 摘 要 】

Several researchers have proposed that mobility control mechanisms can positively contribute to oil recovery in the case of emulsions generated in Enhanced-Oil Recovery (EOR) operations. Chemical EOR techniques that use alkaline components or/and surfactants are known to produce undesirable emulsions that create operational problems and are difficult to break. Other water-based methods have been less studied in this sense. EOR processes such as polymer flooding and LoSal^TM injection require adjustments of water chemistry, mainly by lowering the ionic strength of the solution or by decreasing hardness. The decreased ionic strength of EOR solutions can give rise to more stable water-in-oil emulsions, which are speculated to improve mobility ratio between the injectant and the displaced oil. The first step toward understanding the connection between the emulsions and EOR mechanisms is to show that EOR conditions, such as salinity and hardness requirements, among others, are conducive to stabilizing emulsions. In order to do this, adequate stability proxies are required. This paper reviews commonly used emulsion stability proxies and explains the advantages and disadvantage of methods reviewed. This paper also reviews aqueous-based EOR processes with focus on heavy oil to contextualize in-situ emulsion stabilization conditions. This context sets the basis for comparison of emulsion stability proxies.

【 授权许可】

CC BY   
© 2011 by the authors; licensee MDPI, Basel, Switzerland.