Modeling and Control of Electrowetting Induced Droplet Motion

Micromachines

Herman Oprins¹  Bart Vandevelde¹ 

[1] IMEC, Kapeldreef 75, B3001 Leuven, Belgium;

关键词: electrowetting;    electrostatic droplet actuation;    flow control;   

DOI  :  10.3390/mi3010150

来源: mdpi

【 摘 要 】

In this paper, a general methodology for the dynamic study of electrostatically actuated droplets is presented. A simplified 1D transient model is developed to investigate the transient response of a droplet to an actuation voltage and to study the effect of geometrical and fluid-thermal properties and electrical parameters on this behavior. First, the general approach for the dynamic droplet motion model is described. All forces acting on the droplet are introduced and presented in a simplified algebraic expression. For the retentive force, the empirically extracted correlations are used, and for the electrostatic actuation force, results from electrostatic finite element simulations are used. The dynamic model is applied to electrowetting induced droplet motion between parallel plates in the case of a single actuation electrode and for an array of electrodes. Using this methodology, the influence of the switching frequency and actuation voltage is studied. Furthermore, a linearized equivalent damped mass—spring model is presented to approximate the dynamic droplet motion. It is shown that the optimal switching frequency can be estimated by twice the natural frequency of the linearized damped mass—spring system.

【 授权许可】

CC BY   
© 2012 by the authors; licensee MDPI, Basel, Switzerland.