Slope Estimation during Normal Walking Using a Shank-Mounted Inertial Sensor

Sensors

Antonio M. López¹  Diego Álvarez²  Rafael C. González² 

[1] Multisensor Systems and Robotics Laboratory, University of Oviedo, Campus de Viesques, ed. 2, 33204, Gijón, Asturias, Spain;

关键词: slope estimation;    shank;    inertial sensors;    gait;    tilt;   

DOI  :  10.3390/s120911910

来源: mdpi

【 摘 要 】

In this paper we propose an approach for the estimation of the slope of the walking surface during normal walking using a body-worn sensor composed of a biaxial accelerometer and a uniaxial gyroscope attached to the shank. It builds upon a state of the art technique that was successfully used to estimate the walking velocity from walking stride data, but did not work when used to estimate the slope of the walking surface. As claimed by the authors, the reason was that it did not take into account the actual inclination of the shank of the stance leg at the beginning of the stride (mid stance). In this paper, inspired by the biomechanical characteristics of human walking, we propose to solve this issue by using the accelerometer as a tilt sensor, assuming that at mid stance it is only measuring the gravity acceleration. Results from a set of experiments involving several users walking at different inclinations on a treadmill confirm the feasibility of our approach. A statistical analysis of slope estimations shows in first instance that the technique is capable of distinguishing the different slopes of the walking surface for every subject. It reports a global RMS error (per-unit difference between actual and estimated inclination of the walking surface for each stride identified in the experiments) of 0.05 and this can be reduced to 0.03 with subject-specific calibration and post processing procedures by means of averaging techniques.

【 授权许可】

CC BY   
© 2012 by the authors; licensee MDPI, Basel, Switzerland.