Combustion Characteristics of Chlorine-Free Solid Fuel Produced from Municipal Solid Waste by Hydrothermal Processing

Energies

Bayu Indrawan¹  Pandji Prawisudha² 

[1] Department of Environmental Science and Technology, Tokyo Institute of Technology, Yokohama 226-8502, Japan;

关键词: municipal solid waste;    solid fuel production;    hydrothermal treatment;    combustion characteristics;    chlorine removal;    washing process;   

DOI  :  10.3390/en5114446

来源: mdpi

【 摘 要 】

An experimental study on converting municipal solid waste (MSW) into chlorine-free solid fuel using a combination of hydrothermal processing and water-washing has been performed. After the product was extracted from the reactor, water-washing experiments were then conducted to obtain chlorine-free products with less than 3000 ppm total chlorine content. A series of combustion experiments were then performed for the products before and after the washing process to determine the chlorine content in the exhaust gas and those left in the ash after the combustion process at a certain temperature. A series of thermogravimetric analyses were also conducted to compare the combustion characteristics of the products before and after the washing process. Due to the loss of ash and some volatile matter after washing process, there were increases in the fixed carbon content and the heating value of the product. Considering the possible chlorine emission, the washing process after the hydrothermal treatment should be necessary only if the furnace temperature is more than 800 °C.

【 授权许可】

CC BY   
© 2012 by the authors; licensee MDPI, Basel, Switzerland.