Sensors | |
Design and Application of a Field Sensing System for Ground Anchors in Slopes | |
Se Woon Choi1  Jihoon Lee1  Jong Moon Kim2  | |
[1] Department of Architectural Engineering, Yonsei University, Seoul 120-749, Korea; E-Mails:;Dasumtek Incorporated, Seoul 222-22, Korea; E-Mail: | |
关键词: strain sensing; wireless sensor node; residual tensile force; ground anchor; | |
DOI : 10.3390/s130303739 | |
来源: mdpi | |
【 摘 要 】
In a ground anchor system, cables or tendons connected to a bearing plate are used for stabilization of slopes. Then, the stability of a slope is dependent on maintaining the tension levels in the cables. So far, no research on a strain-based field sensing system for ground anchors has been reported. Therefore, in this study, a practical monitoring system for long-term sensing of tension levels in tendons for anchor-reinforced slopes is proposed. The system for anchor-reinforced slopes is composed of: (1) load cells based on vibrating wire strain gauges (VWSGs), (2) wireless sensor nodes which receive and process the signals from load cells and then transmit the result to a master node through local area communication, (3) master nodes which transmit the data sent from sensor nodes to the server through mobile communication, and (4) a server located at the base station. The system was applied to field sensing of ground anchors in the 62 m-long and 26 m-high slope at the side of the highway. Based on the long-term monitoring, the safety of the anchor-reinforced slope can be secured by the timely applications of re-tensioning processes in tendons.
【 授权许可】
CC BY
© 2013 by the authors; licensee MDPI, Basel, Switzerland.
【 预 览 】
Files | Size | Format | View |
---|---|---|---|
RO202003190037783ZK.pdf | 745KB | download |