Characterization of Flexible Copolymer Optical Fibers for Force Sensing Applications

Sensors

Marek Krehel¹  René M. Rossi¹  Gian-Luca Bona¹ 

[1] Empa, Swiss Federal Laboratories for Materials Science and Technology, Laboratory for Protection and Physiology, Lerchenfeldstrasse 5, St. Gallen 9014, Switzerland; E-Mails:

关键词: force sensor;    optical fibres;    sensitive force sensor;    flexible light guide;   

DOI  :  10.3390/s130911956

来源: mdpi

【 摘 要 】

In this paper, different polymer optical fibres for applications in force sensing systems in textile fabrics are reported. The proposed method is based on the deflection of the light in fibre waveguides. Applying a force on the fibre changes the geometry and affects the wave guiding properties and hence induces light loss in the optical fibre. Fibres out of three different elastic and transparent copolymer materials were successfully produced and tested. Moreover, the influence of the diameter on the sensing properties was studied. The detectable force ranges from 0.05 N to 40 N (applied on 3 cm of fibre length), which can be regulated with the material and the diameter of the fibre. The detected signal loss varied from 0.6% to 78.3%. The fibres have attenuation parameters between 0.16–0.25 dB/cm at 652 nm. We show that the cross-sensitivies to temperature, strain and bends are low. Moreover, the high yield strength (0.0039–0.0054 GPa) and flexibility make these fibres very attractive candidates for integration into textiles to form wearable sensors, medical textiles or even computing systems.

【 授权许可】

CC BY   
© 2013 by the authors; licensee MDPI, Basel, Switzerland.