Performance of a 250 kW Organic Rankine Cycle System for Off-Design Heat Source Conditions †

Energies

Ben-Ran Fu¹  Sung-Wei Hsu²  Yuh-Ren Lee²  Jui-Ching Hsieh²  Chia-Ming Chang² 

[1] Green Energy and Environment Research Laboratories, Industrial Technology Research Institute, Hsinchu 31040, Taiwan;

关键词: organic Rankine cycle;    off-design conditions;    thermal efficiency;   

DOI  :  10.3390/en7063684

来源: mdpi

【 摘 要 】

An organic Rankine cycle system comprised of a preheater, evaporator, condenser, turbine, generator, and pump was used to study its off-design performance and the operational control strategy. R245fa was used as the working fluid. Under the design conditions, the net power output is 243 kW and the system thermal efficiency is 9.5%. For an off-design heat source flow rate (m_W), the operating pressure was controlled to meet the condition that the R245fa reached the liquid and vapor saturation states at the outlet of the preheater and the evaporator, respectively. The analytical results demonstrated that the operating pressure increased with increasing m_W; a higher m_W yielded better heat transfer performance of the preheater and required a smaller evaporator heat capacity, and the net power output and system thermal efficiency increased with increasing m_W. For the range of m_W studied here, the net power output increased by 64.0% while the total heat transfer rate increased by only 9.2%. In summary, off-design operation of the system was examined for a heat source flow rate which varied by –39.0% to +78.0% from the designed rate, resulting in –29.2% to +16.0% and –25.3% to +12.6% variations in the net power output and system thermal efficiency, respectively.

【 授权许可】

CC BY   
© 2014 by the authors; licensee MDPI, Basel, Switzerland.