A Perspective on the Prowaste Concept: Efficient Utilization of Plastic Waste through Product Design and Process Innovation

Materials

Antonio Greco²  Mariaenrica Frigione²  Alfonso Maffezzoli²  Alessandro Marseglia¹ 

[1] CETMA Consortium, S.S.7 Km.706+030, 72100 Brindisi, Italy; E-Mails:;Department of Innovation Engineering, University of Salento, Via per Arnesano, 73100 Lecce, Italy; E-Mails:

关键词: advanced application of recycled mixed plastics;    reinforcement;    adhesion;    mechanical properties;   

DOI  :  10.3390/ma7075385

来源: mdpi

【 摘 要 】

This work is aimed to present an innovative technology for the reinforcement of beams for urban furniture, produced by in-mold extrusion of plastics from solid urban waste. This material, which is usually referred to as “recycled plastic lumber”, is characterized by very poor mechanical properties, which results in high deflections under flexural loads, particularly under creep conditions. The Prowaste project, founded by the EACI (European Agency for Competitiveness and Innovation) in the framework of the Eco-Innovation measure, was finalized to develop an innovative technology for selective reinforcement of recycled plastic lumber. Selective reinforcement was carried out by the addition of pultruded glass rods in specific positions with respect to the cross section of the beam, which allowed optimizing the reinforcing efficiency. The reinforcement of the plastic lumber beams with pultruded rods was tested at industrial scale plant, at Solteco SL (Alfaro, Spain). The beams obtained, characterized by low cost and weight, were commercialized by the Spanish company. The present paper presents the most relevant results of the Prowaste project. Initially, an evaluation of the different materials candidates for the reinforcement of recycled plastic lumber is presented. Plastic lumber beams produced in the industrial plant were characterized in terms of flexural properties. The results obtained are interpreted by means of beam theory, which allows for extrapolation of the characteristic features of beams produced by different reinforcing elements. Finally, a theoretical comparison with other approaches which can be used for the reinforcement of plastic lumber is presented, highlighting that, among others, the Prowaste concept maximizes the stiffening efficiency, allowing to significantly reduce the weight of the components.

【 授权许可】

CC BY   
© 2014 by the authors; licensee MDPI, Basel, Switzerland.