| Sensors | |
| A Laboratory Test Setup for |
|
| Markus Dietrich1  Dieter Rauch1  Adrian Porch2  | |
| [1] Department of Functional Materials, University of Bayreuth, 95440 Bayreuth, Germany; E-Mails:;School of Engineering, Cardiff University, Cardiff, CF24 3AA, Wales, UK; E-Mail: | |
| 关键词: ammonia SCR; ammonia storage; H-ZSM-5; cavity perturbation; complex permittivity; in operando; radio frequency; | |
| DOI : 10.3390/s140916856 | |
| 来源: mdpi | |
PDF
|
|
【 摘 要 】
The catalytic behavior of zeolite catalysts for the ammonia-based selective catalytic reduction (SCR) of nitrogen oxides (NOX) depends strongly on the type of zeolite material. An essential precondition for SCR is a previous ammonia gas adsorption that occurs on acidic sites of the zeolite. In order to understand and develop SCR active materials, it is crucial to know the amount of sorbed ammonia under reaction conditions. To support classical temperature-programmed desorption (TPD) experiments, a correlation of the dielectric properties with the catalytic properties and the ammonia sorption under reaction conditions appears promising. In this work, a laboratory test setup, which enables direct measurements of the dielectric properties of catalytic powder samples under a defined gas atmosphere and temperature by microwave cavity perturbation, has been developed. Based on previous investigations and computational simulations, a resonator cavity and a heating system were designed, installed and characterized. The resonator cavity is designed to operate in its TM010 mode at 1.2 GHz. The first measurement of the ammonia loading of an H-ZSM-5 zeolite confirmed the operating performance of the test setup at constant temperatures of up to 300 °C. It showed how both real and imaginary parts of the relative complex permittivity are strongly correlated with the mass of stored ammonia.
【 授权许可】
CC BY
© 2014 by the authors; licensee MDPI, Basel, Switzerland.
【 预 览 】
| Files | Size | Format | View |
|---|---|---|---|
| RO202003190021702ZK.pdf | 3164KB |
PDF