A Reliable and Simple Method for Fabricating a Poly(Dimethylsiloxane) Electrospray Ionization Chip with a Corner-Integrated Emitter

Sensors

Xiang Qian²  Jie Xu²  Cilong Yu²  Yan Chen¹  Quan Yu²  Kai Ni²  Xiaohao Wang² 

[1] Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China;Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, China; E-Mails:

关键词: microfluidic chip;    multi-layer soft lithography;    electrospray ionization;   

DOI  :  10.3390/s150408931

来源: mdpi

【 摘 要 】

Monolithically integrated emitters have been increasingly applied to microfluidic devices that are coupled to mass spectrometers (MS) as electrospray ionization sources (ESI). A new method was developed to fabricate a duplicable structure which integrated the emitter into a poly(dimethylsiloxane) chip corner. Two photoresist layers containing a raised base which guaranteed the precise integration of the electrospray tip emitter and ensured that the cutting out of the tip exerted no influence even during repeated prototyping were used to ease the operation of the process. Highly stable ESI-MS performance was obtained and the results were compared with those of a commercial fused-silica capillary source. Furthermore, chip-to-chip and run-to-run results indicated both reliability and reproducibility during repeated fabrication. These results reveal that the proposed chip can provide an ideal ion source for MS across many applications, especially with the perspective to be widely used in portable MS during on-site analysis.

【 授权许可】

CC BY   
© 2015 by the authors; licensee MDPI, Basel, Switzerland.