MEMS Microphone Array Sensor for Air-Coupled Impact-Echo

Sensors

Robin Groschup¹  Christian U. Grosse² 

[1] Technische Universität München (TUM), Chair of Non-destructive Testing, Baumbachstr. 7, 81245 Munich, Germany; E-Mail

关键词: nondestructive testing of concrete;    Impact-Echo;    air coupled sensing;    array techniques;    MEMS microphones;   

DOI  :  10.3390/s150714932

来源: mdpi

【 摘 要 】

Impact-Echo (IE) is a nondestructive testing technique for plate like concrete structures. We propose a new sensor concept for air-coupled IE measurements. By using an array of MEMS (micro-electro-mechanical system) microphones, instead of a single receiver, several operational advantages compared to conventional sensing strategies in IE are achieved. The MEMS microphone array sensor is cost effective, less sensitive to undesired effects like acoustic noise and has an optimized sensitivity for signals that need to be extracted for IE data interpretation. The proposed sensing strategy is justified with findings from numerical simulations, showing that the IE resonance in plate like structures causes coherent surface displacements on the specimen under test in an area around the impact location. Therefore, by placing several MEMS microphones on a sensor array board, the IE resonance is easier to be identified in the recorded spectra than with single point microphones or contact type transducers. A comparative measurement between the array sensor, a conventional accelerometer and a measurement microphone clearly shows the suitability of MEMS type microphones and the advantages of using these microphones in an array arrangement for IE. The MEMS microphone array will make air-coupled IE measurements faster and more reliable.

【 授权许可】

CC BY   
© 2015 by the authors; licensee MDPI, Basel, Switzerland.