Material Properties of Various Cast Aluminum Alloys Made Using a Heated Mold Continuous Casting Technique with and without Ultrasonic Vibration

Metals

Mitsuhiro Okayasu¹  Yuta Miyamoto²  Kazuma Morinaka² 

[1] Department of Materials Science and Engineering, Ehime University, 3 Bunkyo-cho, Matsuyama, Ehime 790-8577, Japan;

关键词: aluminum alloy;    ultrasonic vibration;    heated mold continuous casting;    mechanical property;    microstructural characteristic;   

DOI  :  10.3390/met5031440

来源: mdpi

【 摘 要 】

This work was carried out to develop high-quality cast aluminum alloys using a new casting technology. For this purpose, commercial Al alloys were created by heated mold continuous casting (HMC) with ultrasonic vibration (UV). With the HMC process, the grain size and the crystal orientation of the Al alloys were controlled, i.e., fine grains with a uniformly organized lattice formation. In addition, an attempt was made to modify the microstructural formation by cavitation. These microstructural characteristics made excellent mechanical properties. Using UV in the continuous casting process, more fine and spherical grains were slightly disordered, which was detected using electron backscattered diffraction. The mechanical properties of the UV HMC Al alloys were slightly higher than those for the related cast Al alloys without UV. Moreover, the severe vibration caused higher mechanical properties. The lattice and dislocation characteristics of the cast samples made with and without UV processes were analyzed systematically using electron backscattered diffraction.

【 授权许可】

CC BY   
© 2015 by the authors; licensee MDPI, Basel, Switzerland.