FPGA-Based Synthesis of High-Speed Hybrid Carry Select Adders

Advances in Electronics

P.Balasubramanian¹  K.Preethi¹  V.Kokilavani¹ 

DOI  :  10.1155/2015/713843

学科分类：工程和技术（综合）

来源: Hindawi Publishing Corporation

【 摘 要 】

Carry select adder is a square-root time high-speed adder. In this paper, FPGA-based synthesis of conventional and hybrid carry select adders are described with a focus on high speed. Conventionally, carry select adders are realized using the following: (i) full adders and 2 : 1 multiplexers, (ii) full adders, binary to excess 1 code converters, and 2 : 1 multiplexers, and (iii) sharing of common Boolean logic. On the other hand, hybrid carry select adders involve a combination of carry select and carry lookahead adders with/without the use of binary to excess 1 code converters. In this work, two new hybrid carry select adders are proposed involving the carry select and section-carry based carry lookahead subadders with/without binary to excess 1 converters. Seven different carry select adders were implemented in Verilog HDL and their performances were analyzed under two scenarios, dual-operand addition and multioperand addition, where individual operands are of sizes 32 and 64-bits. In the case of dual-operand additions, the hybrid carry select adder comprising the proposed carry select and section-carry based carry lookahead configurations is the fastest. With respect to multioperand additions, the hybrid carry select adder containing the carry select and conventional carry lookahead or section-carry based carry lookahead structures produce similar optimized performance.

【 授权许可】

Unknown