Reconfigurable CPLAG and Modified PFAL AdiabaticLogic Circuits

Advances in Electronics

ManojSharma¹  ArtiNoor¹ 

DOI  :  10.1155/2015/202131

学科分类：工程和技术（综合）

来源: Hindawi Publishing Corporation

【 摘 要 】

Previously, authors have proposed CPLAG and MCPLAG circuits extracting benefits of CPL family implemented based upon semiadiabatic logic for low power VLSI circuit design along with gating concept. Also authors have communicated RCPLAG circuits adding another dimension of reconfigurability into CPLAG/MCPLAG circuits. Moving ahead, in this paper, authors have implemented/reconfigured RCPLAG universal Nand/And gate and universal Nor/Or gate for extracting behavior of dynamic positive edge triggered DFF. Authors have also implemented Adder/Subtractor circuit using different techniques. Authors have also reported modification in PFAL semiadiabatic circuit family to further reduce the power dissipation. Functionality of these is verified and found to be satisfactory. Further these are examined rigorously with voltage,Cload, temperature, and transistor size variation. Performance of these is examined with these variations with power dissipation, delays, rise, and fall times associated. From the analysis it is found that best operating condition for DFF based upon RCPLAG universal gate can be achieved at supply voltage lower than 3 V which can be used for different transistor size up to 36 μm. Average power dissipation is 0.2 μW at 1 V and 30 μW at 2 V at 100 ffCload25°C approximately. Average power dissipated by CPLAG Adder/Subtractot is 58 μW. Modified PFAL circuit reduces average power by 9% approximately.

【 授权许可】

Unknown