Chemical and biochemical engineering quarterly | |
Using Different Preparation Methods to Enhance Fischer-Tropsch Products over Iron-based Catalyst | |
A. A. Mirzaei1  H. Atashi1  F. Fazlollahi1  W. C. Hecker1  M. Sarkari1  | |
关键词: Fischer–Tropsch Synthesis; Fe-Mn/Al2O3 catalyst; co-precipitation; sol-gel; impregnation; | |
DOI : | |
来源: Croatian Society of Chemical Engineers | |
【 摘 要 】
Abstract Three Fe-Mn/Al2O3 catalysts were prepared by three different preparation techniques, i.e. co-precipitation; sol-gel and impregnation, and their Fischer–Tropsch Synthesis (FTS) activity and selectivity behavior were investigated and compared using a fixedbed reactor. It was observed that the impregnated catalyst had the lowest initial activity but was more stable than the other catalysts. The co-precipitated and sol-gel catalysts showed enhanced light olefin production as compared with the impregnated. Methane selectivity decreased with time on stream for both the impregnated and co-precipitated catalysts while it increased for the sol-gel. The impregnated catalyst showed the lowest WGS activity, the highest hydrocarbon selectivity and the highest chain growth probability.
【 授权许可】
Unknown
【 预 览 】
Files | Size | Format | View |
---|---|---|---|
RO201912090769154ZK.pdf | 1713KB | download |