Modification of Robust Filtering of Stratified Surface Topography

Metrology and Measurement Systems

Paweł Dobrzański¹  Paweł Pawlus¹ 

关键词: two-process surfaces;    digital filtering;    robust filter;    valley suppression filter;    modification of filter;   

DOI  :  10.2478/mms-2013-0010

来源: Versita

【 摘 要 】

Various components of surface texture are identified, namely form, waviness and roughness. Separation of these components is done by digital filtering. Several problems exist during analysis of two-process surfaces. Therefore the Gaussian robust profile filtering technique was established and has been studied here. The computer generated 2D profiles and 3D surface topographies having triangular scratches as well as measured stratified surfaces were subjected to filtration. However even robust filter applications cause distortion of profiles having valleys wider than 100 μm. In order to minimize the distortion associated with wide and deep valleys, the robust filter should be modified. A special procedure was elaborated for minimizing distortion of roughness profiles caused by filtration. Application of this method to analyses of several profiles was presented. The difference between 1-D and 2-D filtering of surface topography using the same kind of filter was discussed. As a result we found that modification of a 2-D surface topography filter was not necessary.

【 授权许可】

Unknown