An Experimental and Theoretical Investigation of the Formation of Hydroxyapatite Particles Prepared by an Electrochemical Method

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Adrian Nur¹  Heru Setyawan¹ 

[1] Department of Chemical Engineering, Faculty of Industrial Technology, Sepuluh Nopember Institute of Technology

关键词: Hydroxyapatite;    Electrosynthesis;    Reaction Mechanism;    Kinetic Model;   

DOI  :  10.1252/jcej.15we130

来源: Maruzen Company Ltd

【 摘 要 】

References(19)Electrochemical synthesis of hydroxyapatite particles was performed galvanostatically from a homogeneous solution of Na2H2EDTA·2H2O, KH2PO4 and CaCl2. The electrogeneration of OH− ions by water reduction at the cathode plays an important role in the formation of hydroxyapatite by an electrochemical method. The OH− ions induce the liberation of Ca2+ ions and the dissociation of phosphoric acid, which serve as the reactants for the formation of hydroxyapatite. We found that the final product obtained, i.e. brushite or hydroxyapatite (HA), corresponds to the pH of the solution. Brushite is formed when the pH is <7, and HA is formed when the pH >7. Aging the suspension for 72 h at 40°C transforms brushite to HA even at pH <7. The presence of Ca2+ during aging accelerates brushite conversion. EDTA serves as a chemical agent to mediate particle nucleation and growth. The reaction mechanism and its kinetic model proposed for the HA formation could predict the experimental results well.

【 授权许可】

Unknown