Extracting Lithium from the High Concentration Ratio of Magnesium and Lithium Brine Using Imidazolium-Based Ionic Liquids with Varying Alkyl Chain Lengths

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Daolin Gao¹  Tianlong Deng¹  Xiaoping Yu¹  Shiqiang Wang¹  Yafei Guo¹ 

[1] Tianjin Key Laboratory of Marine Resources and Chemistry, Tianjin Food Safety & Low Carbon Manufacturing Collaborative Innovation Center, College of Chemical Engineering and Material Sciences at Tianjin University of Science and Technology

关键词: Solvent Extraction;    Ionic Liquids;    Triisobutyl Phosphate;    Lithium;    Brine;   

DOI  :  10.1252/jcej.15we046

来源: Maruzen Company Ltd

【 摘 要 】

References(15)Cited-By(1)The present study investigates the extraction of lithium ion from the high concentration ratio of magnesium and lithium salt lake brine in a series of 1-alkyl-3-methylimidazolium-based ionic liquids (ILs), in which the alkyl chain lengths were n-butyl (C4), n-pentyl (C5), n-hexyl (C6), n-heptyl (C7), n-octyl (C8) or n-nonyl (C9), in the presence of triisobutyl phosphate (TIBP)+kerosene systems. The results showed that with shorter alkyl chain length of imidazolium-based ILs there was higher extraction efficiency of lithium ion. The optimal novel FeCl3-free extraction system of [C4mim][PF6]+TIBP+kerosene was established, and the single-pass extraction and back extraction efficiencies for lithium ion were 74.14% and 86.37% under the optimal conditions of [C4mim][PF6] : TIBP : kerosene=1 : 8 : 1 (v/v), pH=5.0, R(O/A)=2.0 in the extraction step, as well as 1 mol/L HCl eluent, R(O/A)=3 in the back extraction step. A comparison of extraction behaviors in a multilevel cross-flow and multistage counter-current extraction process for lithium ion was also carried out. On the basis of infrared spectroscopy and slope analysis methods, a cation-exchange extraction mechanism in the system of [C4mim][PF6]+TIBP+kerosene for lithium ion extraction was demonstrated.

【 授权许可】

Unknown