Preparation of Silica-Coated Quantum Dot Nanoparticle Colloid Solutions and Their Application in in-vivo Fluorescence Imaging

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Hiromu Matsudo¹  Yohsuke Kubota²  Kohsuke Gonda²  Yoshio Kobayashi¹  Tomohiko Nakagawa²  Noriaki Ohuchi² 

[1] Department of Biomolecular Functional Engineering, College of Engineering, Ibaraki University;Division of Surgical Oncology, Graduate School of Medicine, Tohoku University

关键词: Quantum Dot;    Silica-Coating;    Fluorescence Imaging;    Core–Shell;    Nanoparticle;   

DOI  :  10.1252/jcej.14we218

来源: Maruzen Company Ltd

【 摘 要 】

References(32)Cited-By(3)This paper describes three findings. The first is a method for producing colloidal solutions of quantum dot (QD) nanoparticles with silica shells (QD/SiO2). QD nanoparticles averaging 10.3±2.1 nm in size were coated with silica via a sol–gel reaction with tetraethyl orthosilicate using NaOH as a catalyst. The QD/SiO2 particle size could be varied by varying the QD concentration. The average particle sizes were 19.1±3.0 (S-QD/SiO2) and 47.0±6.1 nm (L-QD/SiO2) for QD concentrations of 6.4×10−9 M (4.6×1011 particles/L) and 6.4×10−10 M (4.6×1010 particles/L), respectively. The second finding is a method to modify the particle surface with poly(ethylene glycol), which is called PEGylation (QD/SiO2/PEG). S-QD/SiO2 and L-QD/SiO2 were PEGylated using methoxy polyethylene glycol silane (S-QD/SiO2/PEG and L-QD/SiO2/PEG, respectively). The third finding is an in-vivo fluorescence imaging technique using the QD/SiO2/PEG particle colloid solutions. Both QD/SiO2/PEG particle colloid solutions fluoresced with intensities comparable with that of the QD colloid solution. Mouse tissues could be imaged by injecting the QD/SiO2/PEG colloid solution into them and measuring the emitted fluorescence intensity. The L-QD/SiO2/PEG particles did not form aggregates in blood, which allowed the particles to reach the tissues more efficiently than the S-QD/SiO2/PEG particles.

【 授权许可】

Unknown