Estimation Equation for Sieving Rate Based on the Model for Undersized Particles Passing through Vibrated Particle Bed

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Yuichi Yoshida¹  Yoshiyuki Shirakawa²  Jusuke Hidaka²  Satoshi Ishikawa¹  Atsuko Shimosaka² 

[1] Technical Section, Kansai Wire Netting Co., Ltd.;Department of Chemical Engineering and Materials Science, Faculty of Science and Engineering, Doshisha University

关键词: Sieving Rate;    Passage Probability;    Vibrated Particle Bed;    Boundary;    DEM Simulation;   

DOI  :  10.1252/jcej.12we104

来源: Maruzen Company Ltd

【 摘 要 】

References(9)Cited-By(3)To predict the sieving rate with high accuracy, passage probability models were proposed for undersized particles passing through (1) the vibrated particle bed, (2) the boundary between the oversized particles and the sieve surface, and (3) the sieve openings. The probability of undersized particles passing through a vibrated particle bed depends on the porosity of the bed; the probability was determined by considering the estimated porosity of the bed and the diameter of the particles constituting the bed. The sieve openings were partly covered by oversized particles, and undersized particles could reach these openings only when the gap between the oversized particles and the sieve surface (the boundary) became larger than the undersized particle diameter; the probability of undersized particles passing through the boundary was also derived. Gaudin’s probability was applied to the probability of undersized particles passing through sieve openings without a boundary. The sieving rate calculated by using the proposed estimation equation based on the three probability models corresponded closely to the experimental results, and thus, the sieving rate was predicted with high accuracy.

【 授权许可】

Unknown