Hydrodynamic Characteristics of Binary Solids Mixtures in a Square Internally Circulating Fluidized Bed

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Sang Done Kim¹  Jin Hee Jeon¹ 

[1] Department of Chemical and Biomolecular Engineering, Energy and Environment Reserch Center, Korea Advanced Institute of Science and Technology

关键词: Binary Beds;    Gas Bypassing Fraction;    ICFB;    Pressure Drop;    Solid Circulation Rate;   

DOI  :  10.1252/jcej.08we087

来源: Maruzen Company Ltd

【 摘 要 】

References(17)Cited-By(3)Fluidized bed combustors are commonly operating with complex bed materials of feeding solid wastes, sorbent, bottom ash, sinter and particle split. In the present study, the effects of gas velocities to the fluidized (draft tube) and the moving (annulus section) beds and the weight percent of additive (alumina) on the solid circulation rate (Gs), gas bypassing flow rates (QDA, QAD, Qor) and pressure drop across the orifices (ΔPor) of binary bed materials have been determined in a square internally circulating fluidized bed (0.28 m width × 2.6 m height) with an orifice-type square draft tube (0.1 m width × 0.9 m height). The gas bypassing flow rate through an orifice (Qor), Gs and ΔPor increase with increasing weight percent of the additive. The solid circulation rate has been correlated with ΔPor and the opening area ratio based on the orifice theory. Also, ΔPor, QDA, QAD and Qor have been correlated with gas velocities to the fluidized and the moving beds and Archimedes number.

【 授权许可】

Unknown