Experimental Correlation of Mean Drop Size in Rotating Disc Contactors (RDC)

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Yaser Ziaie-Shirkolaee¹  Saeed Soltanali¹ 

[1] Department of Chemical Engineering, Faculty of Engineering, Tehran University

关键词: Drop Size;    Rotating Disc Contactor;    Hole Distributor;    Sauter Mean Diameter;   

DOI  :  10.1252/jcej.07WE265

来源: Maruzen Company Ltd

【 摘 要 】

References(49)Cited-By(5)A correlation of the average drop size in a rotating disc contractor is presented. The rotating disc contactors were studied under various conditions. Various items of importance are system physical properties, column geometry, disc speed and hole distributor diameter. Two systems water (continuous phase)/acetic acid/toluene (dispersed phase) and water (continuous phase)/succinic acid/n-butanol (dispersed phase) were used to give correlation. The correlation was fitted by software. The R-squared and Durbin-Watson state in this prediction are about 95% and 1.82, respectively. The average absolute value of the relative error, AARE, is about 2.2%.

【 授权许可】

Unknown