Development of CO2 Adsorbent on Anodic Alumite for Ethanol Steam Reforming

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Daisuke Saito²  Haibo Li¹  Lifeng Wang²  Makoto Sakurai²  Hideo Kameyama²  Hideki Kawachi²  Weiyong Ying² 

[1] Department of Chemical Engineering, East China University of Science and Technology;Department of Chemical Engineering, Faculty of Engineering, Tokyo University of Agriculture and Technology

关键词: CO2 Adsorbent;    Lithium Silicate;    Steam Reforming;    Anodic Alumite;   

DOI  :  10.1252/jcej.07WE256

来源: Maruzen Company Ltd

【 摘 要 】

References(20)Cited-By(2)CO2 adsorbent on anodic alumite for ethanol steam reforming was prepared by a dip-coating method. CO2 adsorption amount increased with the number of times the dip-coating was performed. The best results were obtained when the dip-coating was done more than 4 times, whereupon the adsorption amount increased drastically. Performance of the CO2 adsorbent at different temperatures was monitored and recorded. Also, cyclic adsorption–desorption on the selected sample was performed, the result of which shows that desorption at a lower temperature is preferred. The sample also exhibited excellent endurance.

【 授权许可】

Unknown