Optimization of Operating Conditions for Polymer Quality Control in a Continuous Stirred Tank Reactor

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Hirokazu Nishitani¹  Masaru Noda¹  Qing Guo¹ 

[1] Graduate School of Information Science, Nara Institute of Science and Technology

关键词: Polymer Quality Control;    Molecular Weight Distribution;    CSTR;    Optimization;   

DOI  :  10.1252/jcej.07WE254

来源: Maruzen Company Ltd

【 摘 要 】

References(14)Cited-By(1)An objective function to determine the optimal operating conditions to produce polymers with a specified molecular weight distribution (MWD) in a continuous stirred tank reactor (CSTR) was formulated. Two polymerization cases were studied: free radical styrene polymerization and cationic isobutylvinylether polymerization. The optimization results of objective function J1 in view of finite weight fraction stopped near a curve that passes through a predefined optimal point instead of the target point for both cases. Objective function J2, based on two MWD parameters, was formulated to investigate the optimization result of J1. In the case of styrene polymerization, the optimization searches of J2 converged on the optimal point. On the other hand, in the case of isobutylvinylether polymerization, the optimal point cannot be obtained by minimizing J2. In this case, an additional constraint such as polymer concentration is needed to determine an optimal solution.

【 授权许可】

Unknown