Methanol Synthesis by Partial Oxidation of Methane

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Han-Jin Cheon¹  Yun-Soo Lim¹  Hyun-Sik Hahm¹  Eun-Seok Park¹  Hong-Soo Park¹  Young-Kuk Kim¹  Myung-Soo Kim¹ 

[1] Division of Chemical and Ceramic Engineering, Myongji University

关键词: Methanol Synthesis;    Methane Partial Oxidation;    Lattice Oxygen;   

DOI  :  10.1252/jcej.37.152

来源: Maruzen Company Ltd

【 摘 要 】

References(21)Cited-By(2)Methanol was synthesized by the partial oxidation of methane with various oxide catalysts. The reaction was carried out using a pyrex-lined fixed bed reactor at 723–753 K and 20–46 bar, while changing the flow rate and feed gas ratios. The adsorption and desorption characteristics of oxygen were examined with an O2-TPD experiment. Bi-Cs-Mg-Cu-Mo catalyst was found to be the most suitable for methanol synthesis. It appeared that a catalyst that can easily provide lattice oxygen is more suitable for methanol synthesis. The methane conversion and methanol selectivity increased with the temperature. The methane conversion increased with the oxygen concentration, while the methanol selectivity decreased with an increasing oxygen concentration. The feed flow rate did not exhibit any significant effects on methane conversion and methanol selectivity.

【 授权许可】

Unknown