Zeta-Potential of Fouled Thin Film Composite Membrane

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Kenichi Ikeda³  Toshitaka Nakamura³  Hisao Hachisuka³  Shoji Kimura²  Korekazu Ueyama¹ 

[1] Department of Chemical Engineering, Osaka University;Department of Environ. Chemical Engineering, Kogakuin University;Nitto Denko Corp.

关键词: Zeta-Potential;    Fouling;    Thin Film Composite Membrane;    Surfactant;    Reverse Osmosis Membrane;   

DOI  :  10.1252/jcej.32.581

来源: Maruzen Company Ltd

【 摘 要 】

References(7)Cited-By(5)The surface zeta-potential of a cross-linked polyamide thin film composite reverse osmosis membrane was measured using an electrophoresis method. It was confirmed that this method could be effectively applied to analyze the fouling of such membranes.It is known that the water flux of membranes drastically decreases as a result of fouling by surfactants. Although the surfactants adsorbed on reverse osmosis membranes could not be detected by conventional methods such as SEM, EDX and FT-IR, their presence could be clarified by the profile measurements of the surface zeta-potential. The profiles of the membrane surface zeta-potentials changed to more positive values in the measured pH range as a result of fouling by cationic or amphoteric surfactants. This measuring method of surface zeta-potentials allowed us to analyze a very small amount of fouling of a thin film composite reverse osmosis membrane.This method could be used to analyze the fouled surface of the thin film composite reverse osmosis membrane which is used for production of ultrapure water and shows a remarkable decrease in flux. It also became clear that this method is easy and effective for the reverse osmosis membrane surface analysis of adsorbed materials such as surfactants.

【 授权许可】

Unknown