期刊论文详细信息
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN | |
Characteristics and Production Mechanism of Sulfuric Acid and Nitric-Hydrofluoric Acid Pickling Sludge Produced in Manufacture of Stainless Steel | |
Akira Yamamoto1  Rinso Tachibana1  Yoshikazu Kawabata1  Masahiko Ito1  Katsuji Fukushima1  Yoshikazu Seino1  | |
[1]Chiba Works, Kawasaki Steel Corporation | |
关键词: Pickling Sludge; Precipitation; Sulfuric Acid; Nitric-Hydrofluoric Acid; Stainless Steel; | |
DOI : 10.1252/jcej.31.589 | |
来源: Maruzen Company Ltd | |
【 摘 要 】
References(11)Cited-By(5)Stainless steel pickling sludge consists largely of surface scale from stainless steel strips, being composed mainly of Cr oxides. Moreover, the present work shows that the Cr concentration of the sludge is approximately twice that of ordinary stainless steels. The particle size of sulfuric acid sludge is 0.325 μm, while that of nitric-hydrofluoric acid sludge is 9.2 μm. Nitric-hydrofluoric acid sludge tends to coagulate in a relatively short time, while sulfuric acid sludge essentially does not tend to coagulate. The main components of sulfuric acid sludge and nitric-hydrofluoric acid sludge are FeCr2O4 and Cr2O3. In the mechanism of sludge precipitation in the pickling process, acid penetrates cracks in the scale and dissolves part of the scale and the substrate. The undissolved scale then loses the ability to bond with other scale and the substrate and settles out in the pickling tanks.【 授权许可】
Unknown
【 预 览 】
Files | Size | Format | View |
---|---|---|---|
RO201912080694431ZK.pdf | 19KB | download |